INRAL RUST is a fast drying rust-imitating spray paint. Suitable for use on a wide range of surfaces including metal, wood, aluminium, glass, stone and plastic. Can be used both indoors and outdoors. ;/Best used at +20°C, below +18°C drying time and paint properties will be reduced. Contains no lead or chromium compounds and does not damage the ozone layer.
DRYING TIME 1 hour
YIELD: 1.5 m2
WORKING TEMPERATURE: +10°C … +25°C
Inral Rust effect paint
Fast drying rust-imitating spray paint. Suitable for use on a wide range of surfaces including metal, wood, aluminium, glass, stone and plastic. Can be used indoors and outdoors.
- Quick drying
- Realistic rust effect
- Excellent coverage
- Special roughened surface
- Indoor and outdoor use
Clean and degrease the surface. Shake the bottle vigorously for 1 minute. Spray distance 30 cm. For best results, it is recommended to use INRAL GROUND or PLASTIC PRIMER (for plastic surfaces). Spray against UNIVERSAL matt green, orange, black stains to achieve an aged rust effect. Then apply with RUST, 1-2 coats (with 2-3 hour breaks). For long-lasting use, apply INRAL LACKER acrylic lacquer on top (after 3 hours). The paint dries completely after 24 hours. When finished, turn the bottle upside down and clean the spray bottle by holding it for a few seconds.
Store upright in a dry place at +5°C to +25°C. Protect vials from direct sunlight and heat above 50°C. Transport temperature -15°C to +25°C, avoid direct sunlight and heat up to 50°C.