All-season polyurethane foam adhesive with adapter. Application temperature from -10°С to +30°С. Suitable for gluing thermal insulation boards, lightweight polystyrene constructions, as well as for sealing joints, water supply insulation, sound insulation of bath and shower enclosure soles, sealing of roofs and attics. Does not deform structures. Glues and seals. Excellent adhesion to polystyrene, concrete, brick, wood, PVC. Up to 6 m2 of thermal insulation boards can be glued with one vial. Insoluble in polystyrene. Hardens quickly. Small secondary expansion. After hardening, polystyrene has thermal insulation properties. Tensile strength – 10 kg / cm2. Full hardening time 12 hours
Users manual – thoroughly clean and moist the work surface. Shake the vial vigorously, pressing the vial adapter onto the valve. Remove the adapter fuse before work. Always keep the vial upside down during operation. Adjust the blowing intensity and the amount of foam by pressing the adapter knob. Blow the foam glue over the entire perimeter of the board. If the perimeter of the panel is larger than 0.5 m2, cover with additional strips in the middle. Cutting time 9 minutes. Suitable for outdoor and indoor work. Thermal resistance after hardening -40°C … + 80°C.
Store upright in a dry place at a temperature of +5°C to +25°C. Shelf life – 24 months from the date of manufacture, in accordance with the storage rules. Protect the vials from direct sunlight and heat above 50°C. Quantity in the box – 12 pcs. Quantity on the pallet – 720 pcs. The weight of one vial is 0.780 kg. Transport temperature -5°C to +25°C.