Primer spray for plastic surfaces. For use on cars, motorcycles, garden furniture or any other plastic surface. High quality, excellent coating properties and extreme abrasion resistance. PLASTIC PRIMER provides particularly excellent adhesion between polypropylene-based plastics (polyethylene EPDM, some ABS types) and other coated surfaces. Ideal for indoor and outdoor applications. Resistant to weathering. Free of lead or chromium compounds, does not deplete the ozone layer; /Best painted at +20 °C. Below +18 °C the drying time and paint properties deteriorate. /USE. Wipe and degrease the surface. Shake the can vigorously for 1 min. Spray evenly on the surface at a distance of 30Cm. Most effective when applied as a thin coat, with breaks, in several layers. When finished, turn the can upside down and clean the pulveriser by holding it down for a few seconds; /CURING TIME 5 min.; /YIELD: 2 m2; /WORKING TEMPERATURE: +18 ℃ … +25 ℃
| Index | Value |
|---|---|
| RAL code | - |
| Colour | Clear |
| Gloss | matte |
| Base | chlorinated polyolefin |
| Drying time (+20 °C) | 5 min |
| Coating with 1 can, 1 layer (400 ml) | 2 m2 |
| Recommended number of layers | 1-2 |
| Temperature resistance (indicative) | -20 - +90 °C |
| Suitable for surfaces | Polyethylene and polypropylene Not suitable for polystyrene and ABS surfaces |
| Applications | Cars, motorcycles, garden furniture or other plastic surfaces |
| Priming | - |
| Coating with other layers | 10 min |
| Mandatory conditions of use | Not suitable for use on materials sensitive to organic solvents (xylene, acetone). |
| Volume | 400 ml |
| Expiry date | 10 years |
Store upright in a dry place at +5°C to +25°C. Do not expose the cans to direct sunlight or heat above 50°C. Transport temperature from -15°C to +25°C, avoid direct sunlight and heat up to 50°C.