Protective anti-corrosion spray coating for steel, cast iron and other surfaces. Excellent adhesion to the substrate, weatherproof. The matt coating improves adhesion to surface paints and enamels. Recommended as a primer for INRAL UNIVERSAL decorative enamels or other paints. For new installations, industrial structures, electrical poles, street lamps, fences and barriers, tanks and containers, steel products, etc. For construction and damage repair, renovation and remediation on all of the above; /Best sprayed at +20 °C. At temperatures below +18 °C, drying times and paint properties deteriorate. Free of lead or chromium compounds, does not deplete the ozone layer; /USE. Clean and degrease the surface. Shake the can vigorously for 1 min. Spray evenly on the surface at a distance of 30Cm. Most effective when applied as a thin coat, with breaks, in several layers. Top coat after 1 hour or later. When finished, turn the can upside down and clean the pulveriser by holding it down for a few seconds; /CURING TIME 10 min.; /YIELD: 1.5 m2; /WORKING TEMPERATURE: +18 ℃ … +25 ℃
Inral Spray paints GROUND ANTI-CORROSION, grey
Corrosion-protective spray paint for steel, cast iron and other surfaces. Excellent adhesion to base surface, wear-resistant. Use as a primer for INRAL UNIVERSAL or other decorative enamel series.
- Excellent coverage and adhesion to surfaces and other enamels
- Resistance to weathering and periodic water exposure
- thermal resistance up to +110 °C