A multipurpose web spray contact adhesive. With increased adhesion strength and temperature resistance to 120 °C. Can be used indoors and outdoors for a wide range of applications such as: bonding foam, fabric, leather and other lightweight materials to rigid plastic, metal, concrete, masonry, plaster, cardboard, ceramics, glass and wood based substrates. Perfect for vehicle
trimming applications.
Application:
- Bonding foam, fabric, leather and other lightweight materials to rigid plastic, metal, concrete, masonry, plaster, cardboard, ceramics, glass and wood based substrates.
- Bonding many materials in furniture, automotive, packaging, constructions.
- Perfect for vehicle trimming applications.
- Not recommended for use with plasticised vinyl, flexible plastics, expanded/extruded polystyrene, PE or PP.
The surface should be clean, dry, smooth, free of grease, mechanical damage and other particles that reduce adhesion.
Shake the product well before use (for at least 30 sec).
Bonding can be done from 0 °C to +35 °C, but the recommended application and product temperature should be in range from +15 °C to +27 °C. If not complying recommended temperatures, the drying times and adhesion properties deteriorates.
For permanent adhesion apply the product on both surfaces in an equal layer, allow to dry 3 minutes and press both sides together.
For temporary adhesion apply the product on one surface in an equal layer, allow to dry 3 minutes and press both sides together.
On porous surfaces apply several layers. Spraying distance is about 20 cm. from the surface.
Product is packaged in 500 ml. cans.
Store up to 18 months from the production date indicated in original sealed packaging at +10 °C to +50 °C.
Protect from frost and direct sunlight. Do not store directly on concrete floor.
Transport at a temperature of not less than +10 °C.
