INRAL GLITTER Protective lacquer with glitter for a silver mica effect. The final effect depends on the colour of the painted element. The darker the base, the lighter the effect. For painting wood, metal, glass, ceramic, plastic and paper surfaces. Can be used both indoors and outdoors. ;/Best used at +20°C, below +18°C drying times and paint properties are reduced. Contains no lead or chromium compounds and does not damage the ozone layer.
DRYING TIME 20 min.
SURFACE: 2.2 m2
WORKING TEMPERATURE: +10°C … +25°C
Clean and degrease the surface. Shake the bottle vigorously for 1 minute. Then apply 1-2 coats of paint (2-3 hour intervals) at a distance of 30 cm. Touch dry surface after 1-2 hours, completely dry after 24 hours. When finished, turn the bottle upside down and clean the spray bottle by holding it for a few seconds.
Store upright in a dry place at +5°C to +25°C. Protect vials from direct sunlight and heat above 50°C. Transport temperature -15°C to +25°C, avoid direct sunlight and heat up to 50°C