INRAL DECOR GRANITE spray paint with granite effect. This decorative paint imitates solid and natural stone. Sprayed on surfaces that are not normally made of stone, such as metal, wood, plastic, polystyrene, clay, ceramics, glass, etc. to give the impression of a stone surface. Can be used both indoors and outdoors (away from rain and moisture) ;/Best used at +20°C, below +18°C drying times and paint properties will be reduced. Contains no lead or chromium compounds and does not harm the ozone layer.
DRYING TIME 2 hours
SURFACE: 2.2 m2
WORKING TEMPERATURE: +10°C … +25°C
Inral Granite effect paint ( cream color)
Decorative paints create an imitation of real stone. Sprayed on surfaces not normally made of stone: metal, wood, plastic, polystyrene, clay, ceramics, glass, to give an imitation stone surface. Can be used indoors or outdoors (away from moisture).
- A granite effect that can make any object look like stone;
- Special rough surface
- Excellent coverage
- Can be used indoors and outdoors (away from rain and moisture)
Clean and degrease the surface. It is recommended to coat the surface with INRAL GROUND or PLASTIC PRIMER (for plastic surfaces). Shake the bottle vigorously for 1 minute. Then apply 1-2 coats of paint (2-3 hour intervals) at a distance of 30 cm. Touch dry surface after 1-2 hours, completely dry after 24 hours. When finished, turn the bottle upside down and clean the spray bottle by holding it for a few seconds.
Store upright in a dry place at +5°C to +25°C. Protect vials from direct sunlight and heat above 50°C. Transport temperature -15°C to +25°C, avoid direct sunlight and heat up to 50°C.