INRAL DECOR GRANITE spray paint with granite effect. Decorative paint to create solid and real stone imitation. Sprayed on surfaces not normally made of stone, such as metal, wood, plastic, polystyrene, clay, ceramics, glass, etc., to give the appearance of a stone surface. For indoor or outdoor applications (protect from rain and moisture); /WORKFLOW: The painted surface must be clean, dry and grease-free. Shake the can vigorously for about 2 minutes. Spraying distance 40-50Cm. Test the paint in an inconspicuous place to check compatibility and colour tone. For best results, use INRAL GROUND (matching the colour of the effect paint) or PLASTIC PRIMER (for plastic surfaces) and/or matte grey enamel paint (which will reduce the consumption of the GRANITE effect). Then apply GRANITE paint in 1-2 coats (with a 30 min break). For long-lasting use, apply INRAL LACKER acrylic varnish on top (after 6 hours). The paint dries completely after 48 hours. After use, turn the can upside down and spray the valve until empty; /FULL DRYING TIME 48 hrs; /YIELD: 1.5 m2; /WORKING TEMPERATURE: +18 ℃ … +25 ℃
Inral GRANITE EFFECT spray decor paint, obsidian black
Decorative paint to create an imitation of real stone. Sprayed on non-stone surfaces: metal, wood, plastic, polystyrene, clay, ceramics, glass, to imitate the surface of stone. For indoor or outdoor applications (keep away from moisture).
- Granite effect that can make any object look like stone
- embossing paint will not only provide stone-like appearance but also the stone feel
| Index | Value |
|---|---|
| RAL code | - |
| Colour | Obsidian black |
| Gloss | matte |
| Base | special resins |
| Drying time (+20 °C) | 48 h |
| Coating with 1 can, 1 layer (400 ml) | 1,5 m2 |
| Recommended number of layers | 1-2 |
| Temperature resistance (indicative) | -15 - +60 °C (short changes up to +110 ° C tolerated) |
| Suitable for surfaces | Various: metal, wood, plastic, polystyrol, stone, clay, ceramics, glass, cardboard, paper, also rotang, fur |
| Applications | Planters, garden sculptures and decorations |
| Priming | Recommended |
| Coating with other layers | any time |
| Mandatory conditions of use | Follow the label information |
| Volume | 400 ml |
| Expiry date | 5 years |
Store and transport upright in a dry place, protected from chemical and mechanical effects, at a temperature of +5 °C to +25 °C. Safety information on the packaging and statutory storage procedures must be observed. Keep the cans out of direct sunlight and away from temperatures above 50°C.